USB Virtual COM driver

In order to communicate with the MCU mounted on EVBKS5, the host PC installs an appropriate USB driver.

1. USB Driver Installation

Step1. Download STM32 virtual serial driver of STSW_STM32102,

§ https://www.st.com/en/development-tools/stsw-stm32102.html

Step 2. Install VCP_V1.5.0_Setup_W7_x64_64bits.exe by default settings.

2. Connect EVB  to PC

Step1. Connect  host PC USB port with EVBKS5 evaluation board’s USB Type-C interface

Step 2. You can check a new COM port device show up in host PC’s device manager.