페이지 선택
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Search in pages

Easylink 앱을 사용하여 통신모듈을 WiFi AP에 접속시키는 방법을 간략히 설명한다.

 

 

1. Open the APP

Click the “+” icon in the upper right corner of the interface to enter the main interface of the device distribution network.

 

进入配网页面

 

 

 

2. Start distribution network:

Press the Easylink button on the device to enter the re-distribution state.

The APP side inputs the SSID and KEY of the WiFi, as shown in the figure below, click the fast distribution mode: “Fast mode”.

 

ssid 和 key                                    配网中

 

 

 

3. After the device obtains the SSID and KEY, the APP discovers the device, as shown in the figure below,

click Confirm to complete the distribution network.

 

配网中

 

 

 

4. Click the icon “ < ” in the above image to enter the device list interface → Click the icon “ i icon to enter the device information page.

 

设备列表页面

 

 

 

5. In the device list, click “Edit” in the figure to enter the device information modification interface.

 

设备详情页

 

 

 

6.  In the modification interface, the user can reset the device IP address, port number and other information,

as shown below, click “confirm” to save successfully.

 

设备详情页待编辑                            设备详情页待编辑

 

After the device information is modified, the module debug serial port output log information is as follows:

设备log

 

 

 

 

7. Click the device name in the device list to enter the device serial port transparent dialogue interface, as shown below.

⊕ The serial port transparent transmission demonstration function of the mobile APP only supports iOS, and does not support Android at present.

设备列表页面                                    设备列表页面

 

 

At this point, you need to use the USB to serial port tool to connect the user serial port of the module to the PC,

and open the serial port tool software of the PC to send and receive operations, as shown in the figure below.

 

透传设备端透传设备端

 

 

 

The transparent information is specifically as follows:

  • Mobile APP sends to the device → Hello g55
  • The device sends to the mobile APP → hello easylink

The above is the Easylink distribution process. Users can use the Easylink function to distribute the device to the MXOS smart device.

Adsense

 

 WiFi IoT Module

 

www.mxchip.com

 

 

 Bluetooth Module

www.feasycom.com

 

 

 5G/LTE/CAT-M1/NB-IoT

 

www.simcom.com

 

Viewed Page List