EVB-EDT2400X-SA Driver Installation
Install two kinds of drivers to use Serial Communication and JTAG SWD used for the interface of EVB.
1. USB Driver for Srial Communication (UART)
| Silicon Labs USB Driver | § CP210x USB to UART Bridge VCP Drivers |
 |
 |
|
Connecting USB Cable ( EVB is also using USB VBUS power)
|
Enhanced COM Port → Host Interface for Host MCU, for example AT Command Standard COM Port → Log Message or CLI Command Input Baud Rate: 115,200 bps |
2. Install JLINK Driver(Segger SW Pack)
| Segger SW Pack(Jlink Drvier) | § https://www.segger.com/downloads/jlink/ |
 |
|
|
-Connecting J-link USB cable to PC -If the driver is not installed as a J-Link driver, Try to run the install JLink SW pack as administrator → |
 |
WiFi IoT Module
Bluetooth Module
5G/LTE/CAT-M1/NB-IoT
