SIM82XX~83XX Series AT Command List
SIM82XX, SIM83XX Serie의 AT Command 리스트는 다음과 같다.
| 01. Introduction | 11. TCP/IP | 21. UIM Hot swap |
| 02. V.25TER | 12. FTPS | 22. File System |
| 03. Status Control | 13. HTTPS | 23. Audio |
| 04. Network | 14. MQTT(S) | 24. TTS |
| 05. Call Control | 15. NTP | 25. Bluetooth |
| 06. Phonebook | 16. HTP | 26. MiFi |
| 07. SIM Application Toolkit | 17. GPS | 27. Gadgets on The AP Side |
| 08. GPRS | 18. LBS | |
| 09. SMS | 19. Hardware | |
| 10. SSL | 20. Hardware Related Commands |
| 2. V.25TER | Command | Description |
| F0201 | A/ | Re-issues the last command given |
| F0202 | ATD | Mobile originated call to dial a number |
| F0203 | ATD><mem><n> | Originate call from specified memory |
| F0204 | ATD><n> | Originate call from active memory |
| F0205 | ATD><n> | Originate call from active memory |
| F0206 | ATA | Call answer |
| F0207 | ATH | Disconnect existing call |
| F0208 | ATS0 | Automatic answer incoming call |
| F0209 | +++ | Switch from data mode to command mode |
| F0210 | ATO | Switch from command mode to data mode |
| F0211 | ATI | Display product identification information |
| F0212 | AT+IPR | Set local baud rate temporarily |
| F0213 | AT+ICF | Set control character framing |
| F0214 | AT+IFC | Set local data flow control |
| F0215 | AT&C | Set DCD function mode |
| F0216 | ATE | Enable command echo |
| F0217 | AT&V | Display current configuration |
| F0218 | AT&D | Set DTR function mode |
| F0219 | ATV | Set result code format mode |
| F0220 | AT&F | Set all current parameters to manufacturer defaults |
| F0221 | ATQ | Set Result Code Presentation Mode |
| F0222 | ATX | Set CONNECT Result Code Format |
| F0223 | AT\V | Set CONNECT Result Code Format About Protocol |
| F0224 | AT&E | Set CONNECT Result Code Format About Speed |
| F0225 | AT&W | Save the user setting to ME |
| F0226 | ATZ | Restore the user setting from ME |
| F0227 | AT+CGMI | Request manufacturer identification |
| F0228 | AT+CGMM | Request model identification |
| F0229 | AT+CGMR | Request revision identification |
| F0230 | AT+CGSN | Request product serial number identification |
| F0231 | AT+CSCS | Select TE character set |
| F0232 | AT+CIMI | Request international mobile subscriber identity |
| F0233 | AT+GCAP | Request overall capabilities |
| 3. Status Control | Command | Description |
| F0301 | AT+CFUN | Set phone functionality |
| F0302 | AT+CPIN | Enter PIN |
| F0303 | AT+CICCID | Read ICCID from SIM card |
| F0304 | AT+CSIM | Generic SIM access |
| F0305 | AT+CRSM | Restricted SIM access |
| F0306 | AT+SPIC | Times remain to input SIM PIN/PUK |
| F0307 | AT+CSPN | Get service provider name from SIM |
| F0308 | AT+CSQ | Query signal quality |
| F0309 | AT+AUTOCSQ | Set CSQ report |
| F0310 | AT+CSQDELTA | Set RSSI delta change threshold |
| F0311 | AT+CATR | Configure URC destination interface |
| F0312 | AT+CPOF | Power down the module |
| F0313 | AT+CRESET | Reset the module |
| F0314 | AT+CACM | Accumulated call meter |
| F0315 | AT+CAMM | Accumulated call meter maximum |
| F0316 | AT+CPUC | Price per unit and currency table |
| F0317 | AT+CCLK | Real time clock management |
| F0318 | AT+CMEE | Report mobile equipment error |
| F0319 | AT+CPAS | Phone activity status |
| F0320 | AT+SIMEI | Set IMEI for the module |
| F0321 | AT+CSVM | Voice Mail Subscriber number |
| F0322 | AT+SMSIMCFG | Single/Dual SIM configuration |
| 4. Network | Command | Description |
| F0401 | AT+CREG | Network Registration |
| F0402 | AT+COPS | Operator selection |
| F0403 | AT+CLCK | Facility lock |
| F0404 | AT+CPWD | Change password |
| F0405 | AT+CCUG | Closed User Group |
| F0406 | AT+CUSD | Unstructured supplementary service data |
| F0407 | AT+CAOC | Advice of Charge |
| F0408 | AT+CSSN | Supplementary service notifications |
| F0409 | AT+CPOL | Preferred operator list |
| F0410 | AT+COPN | Read operator names |
| F0411 | AT+CNMP | Preferred mode selection |
| F0412 | AT+CPSI | Inquiring UE system information |
| F0413 | AT+CNSMOD | Show network system mode |
| F0414 | AT+CEREG | EPS network registration status |
| F0415 | AT+CTZU | Automatic time and time zone update |
| F0416 | AT+CTZR | Time and time zone reporting |
| F0417 | AT+CNWINFO | Inquiring extra network info |
| F0418 | AT+C5GREG | NR5G network registration status |
| F0419 | AT+CSYSSEL | Set system selection pref |
| F0420 | AT+CCELLCFG | Set lte cell configuration |
| F0421 | AT+C5GCELLCFG | Set NR5G cell configuration |
| 5. Call Control | Command | Description |
| F0501 | AT+CVHU | Voice hang up control |
| F0502 | AT+CHUP | Hang up call |
| F0503 | AT+CBST | Select bearer service type |
| F0504 | AT+CRLP | Radio link protocol |
| F0505 | AT+CR | Service reporting control |
| F0506 | AT+CRC | Cellular result codes |
| F0507 | AT+CLCC | List current calls |
| F0508 | AT+CEER | Extended error report |
| F0509 | AT+CCWA | Call waiting |
| F0510 | AT+CHLD | Call related supplementary services |
| F0511 | AT+CCFC | Call forwarding number and conditions |
| F0512 | AT+CLIP | Calling line identification presentation |
| F0513 | AT+CLIR | Calling line identification restriction |
| F0514 | AT+COLP | Connected line identification presentation |
| F0515 | AT+VTS | DTMF and tone generation |
| F0516 | AT+VTD | Tone duration |
| F0517 | AT+CSTA | Select type of address |
| F0518 | AT+CMOD | Call mode |
| F0519 | AT+VMUTE | Speaker mute control |
| F0520 | AT+CMUT | Microphone mute control |
| F0521 | AT+MORING | Enable or disable report MO ring URC |
| F0522 | AT+CLVL | Loudspeaker volume level |
| F0523 | AT+CRXVOL | Adjust RX voice output speaker volume |
| F0524 | AT+ CTXVOL | Adjust TX voice mic volume |
| F0525 | AT+ CTXMICGAIN | Adjust TX voice mic gain |
| F0526 | AT+CECH | Inhibit far-end echo |
| F0527 | AT+CECDT | Inhibit echo during doubletalk |
| 6. Phonebook | Command | Description |
| F0601 | AT+CPBS | Select Phonebook memory storage |
| F0602 | AT+CPBR | Read Phonebook entries |
| F0603 | AT+CPBF | Find Phonebook entries |
| F0604 | AT+CPBW | Write Phonebook entry |
| F0605 | AT+CNUM | Subscriber number |
| 7. SIM Application Toolkit | Command | Description |
| L0701 | AT+STIN | SAT Indication |
| L0702 | AT+STGI | Get SAT information |
| L0703 | AT+STGR | SAT respond |
| L0704 | AT+STK | STK switch |
| L0705 | AT+STKFMT | Set STK pdu format |
| L0706 | AT+STENV | Original STK PDU Envelope Command |
| L0707 | AT+STSM | Get STK Setup Menu List with PDU Mode |
| 8. GPRS | Command | Description |
| F0801 | AT+CGREG | GPRS network registration status |
| F0802 | AT+CGATT | Packet domain attach or detach |
| F0803 | AT+CGACT | GPRS network registration status |
| F0804 | AT+CGDCONT | Define PDP context |
| F0805 | AT+CGDSCONT | Define Secondary PDP Context |
| F0806 | AT+CGTFT | Traffic Flow Template |
| F0807 | AT+CGQREQ | Quality of service profile (requested) |
| F0808 | AT+CGEQREQ | 3G quality of service profile (requested) |
| F0809 | AT+CGQMIN | Quality of service profile (minimum acceptable) |
| F0810 | AT+CGEQMIN | 3G quality of service profile (minimum acceptable) |
| F0811 | AT+CGDATA | Enter data state |
| F0812 | AT+CGPADDR | Show PDP address |
| F0813 | AT+CGCLASS | GPRS mobile station class |
| F0814 | AT+CGEREP | GPRS event reporting |
| F0815 | AT+CGAUTH | Set type of authentication for PDP-IP connections of GPRS |
| 9. SMS | Command | Description |
| F0901 | AT+CSMS | Select message service |
| F0902 | AT+CPMS | Preferred message storage |
| F0903 | AT+CMGF | Select SMS message format |
| F0904 | AT+CSCA | SMS service center address |
| F0905 | AT+CSCB | Select cell broadcast message indication |
| F0906 | AT+CSMP | Set text mode parameters |
| F0907 | AT+CSDH | Show text mode parameters |
| F0908 | AT+CNMA | New message acknowledgement to ME/TA |
| F0909 | AT+CNMI | New message indications to TE |
| F0910 | AT+CGSMS | Select service for MO SMS messages |
| F0911 | AT+CMGL | List SMS messages from preferred store |
| F0912 | AT+CMGR | Read message |
| F0913 | AT+CMGS | Send message |
| F0914 | AT+CMSS | Send message from storage |
| F0915 | AT+CMGW | Write message to memory |
| F0916 | AT+CMGD | Delete message |
| F0917 | AT+CMGMT | Change message status |
| F0918 | AT+CMVP | Set message valid period |
| F0919 | AT+CMGRD | Read and delete message |
| F0920 | AT+CMGSEX | Send message |
| F0921 | AT+CMSSEX | Send multi messages from storage |
| 10. SSL | Command | Description |
| F1001 | AT+CCHSTART | Start SSL service |
| F1002 | AT+CCHSTOP | Stop SSL service |
| F1003 | AT+CCHOPEN | Connect to SSL server |
| F1004 | AT+CCHCLOSE | Disconnect from SSL server |
| F1005 | AT+CCHSEND | Send data to SSL server |
| F1006 | AT+CCHRECV | Read the cached data that received from the SSL server |
| F1007 | AT+CCHCFG | Configure the client context |
| F1008 | AT+CCHSSLCFG | Set the SSL context |
| F1009 | AT+CCHSET | Configure the report mode of sending and receiving data |
| F1010 | AT+CCHMODE | Configure the mode of sending and receiving data |
| F1011 | AT+CCHADDR | Get the IPV4 address |
| F1012 | AT+CSSLCFG | Configure the SSL context |
| F1013 | AT+CCERTDOWN | Download certificate into the module |
| F1014 | AT+CCERTLIST | List certificates |
| F1015 | AT+CCERTDELE | Delete certificates |
| 11. TCPIP | Command | Description |
| F1101 | AT+NETOPEN | Start TCPIP service |
| F1102 | AT+NETCLOSE | Stop TCPIP service |
| F1103 | AT+CIPOPEN | Setup TCP/UDP client socket connection |
| F1104 | AT+CIPCLOSE | Destroy TCP/UDP client socket connection |
| F1105 | AT+CIPSEND | Send TCP/UDP data |
| F1106 | AT+CIPRXGET | Retrieve TCP/UDP buffered data |
| F1107 | AT+IPADDR | Get IP address of PDP context |
| F1108 | AT+CIPHEAD | Add an IP header when receiving data |
| F1109 | AT+CIPSRIP | Show remote IP address and port |
| F1110 | AT+CIPMODE | Select TCP/IP application mode |
| F1111 | AT+CIPSENDMOE | Set sending mode |
| F1112 | AT+CIPTIMEOUT | Set TCP/IP timeout value |
| F1113 | AT+CIPCCFG | Configure parameters of socket |
| F1114 | AT+SERVERSTART | Startup TCP server |
| F1115 | AT+SERVERSTOP | Stop TCP server |
| F1116 | AT+CIPACK | Query TCP connection data transmitting status |
| F1131 | AT+CDNSGIP | Query the IP address of given domain name |
| F1132 | AT+CDNSGHNAME | Query the domain name of given IP address |
| F1133 | AT+CIPDNSSET | Set DNS query parameters |
| F1134 | AT+CPING | Ping destination address |
| F1135 | AT+CPINGSTOP | Stop an ongoing ping session |
| 12. FTP(S) | Command | Description |
| F1201 | AT+CFTPSSTART | Start FTP(S) service |
| F1202 | AT+CFTPSSTOP | Stop FTP(S) Service |
| F1203 | AT+CFTPSLOGIN | Login to a FTP(S)server |
| F1204 | AT+CFTPSLOGOUT | Logout FTP(S) server |
| F1205 | AT+CFTPSMKD | Create a new directory on FTP(S) server |
| F1206 | AT+CFTPSRMD | Delete a directory on FTP(S) server |
| F1207 | AT+CFTPSDELE | Delete a file on FTP(S) server |
| F1208 | AT+CFTPSCWD | Change the current directory on FTP(S) server |
| F1209 | AT+CFTPSPWD | Get the current directory on FTP(S) server |
| F1210 | AT+CFTPSTYPE | set the transfer type on FTP(S) server |
| F1211 | AT+CFTPSLIST | List the items in the directory on FTP(S) server |
| F1212 | AT+CFTPSGETFILE | Get a file from FTP(S) server to module |
| F1213 | AT+CFTPSPUTFILE | Put a file from module to FTP(S) server |
| F1214 | AT+CFTPSGET | Get a file from FTP(S) server to serial port |
| F1215 | AT+CFTPSPUT | Put a file to FTP(S) server through serial port |
| F1216 | AT+CFTPSSINGLEIP | Set FTP(S) data socket address type |
| F1217 | AT+CFTPSCACHERD | Output cached data to MCU |
| F1218 | AT+CFTPSABORT | Abort FTP(S) operations |
| F1219 | AT+CFTPSSIZE | Get the File Size on FTP(S) server |
| 13. HTTP(S) | Command | Description |
| F1301 | AT+HTTPINIT | Sart HTTP(S) service |
| F1302 | AT+HTTPTERM | Stop HTTP(S) service. |
| F1303 | AT+HTTPPARA | Set HTTP(S) Parameter |
| F1304 | AT+HTTPACTION | HTTP(S) Method Action |
| F1305 | AT+HTTPHEAD | Read the HTTP(S) Header Information of Server Response |
| F1306 | AT+HTTPREAD | Read the response Information of HTTP(S) Server |
| F1307 | AT+HTTPDATA | Input HTTP(S) Data |
| F1308 | AT+HTTPPOSTFILE | Send HTTP(S) Request to HTTP server by File |
| F1309 | AT+HTTPREADFILE | Receive HTTP(S) Response Content to a file |
| 14. MQTT(S) | Command | Description |
| F1401 | AT+CMQTTSTART | Start MQTT service |
| F1402 | AT+CMQTTSTOP | STOP MQTT service |
| F1403 | AT+CMQTTACCQ | Acquire a client |
| F1404 | AT+CMQTTREL | Release a client |
| F1405 | AT+CMQTTSSLCFG | Set the SSL context |
| F1406 | AT+CMQTTWILLTOPIC | Input the will topic |
| F1407 | AT+CMQTTWILLMSG | Input the will message |
| F1408 | AT+CMQTTDISC | Disconnect from server |
| F1409 | AT+CMQTTCONNECT | Connect to MQTT server |
| F1410 | AT+CMQTTTOPIC | Input the publish message topic |
| F1411 | AT+CMQTTPAYLOAD | Input the publish message body |
| F1412 | AT+CMQTTPUB | Publish a message to server |
| F1413 | AT+CMQTTSUBTOPIC | Input a subscribe message topic |
| F1414 | AT+CMQTTSUB | Subscribe a message to server |
| F1415 | AT+CMQTTUNSUBTOPIC | Input a unsubscribe message topic |
| F1416 | AT+CMQTTUNSUB | Unsubscribe a message to server |
| F1417 | AT+CMQTTCFG | Configure the MQTT Context |
| 15. NTP | Command | Description |
| F1501 | AT+CNTP | Update system time |
| 16. HTP | Command | Description |
| F1601 | AT+CHTPSERV | Set HTP server info |
| F1602 | AT+CHTPUPDATE | Updating date time using HTP protocol |
| 17. GPS | Command | Description |
| F1701 | AT+CGPS | Start/Stop GPS session |
| F1702 | AT+CGPSINFO | Get GPS fixed position information |
| F1703 | AT+CGPSCOLD | Cold start GPS |
| F1704 | AT+CGPSHOT | Hot start GPS |
| F1705 | AT+CGPSURL | Set AGPS default server URL |
| F1706 | AT+CGPSSSL | Set AGPS transport security |
| F1707 | AT+CGPSAUTO | Start GPS automatic |
| F1708 | AT+CGPSNMEA | Configure NMEA sentence type |
| F1709 | AT+CGPSNMEARATE | Set NMEA output rate |
| F1710 | AT+CGPSMD | Configure AGPS MO method |
| F1711 | AT+CGPSFTM | Start GPS test mode |
| F1712 | AT+CGPSDEL | Delete the GPS information |
| F1713 | AT+CGPSXE | Enable/Disable GPS XTRA function |
| F1714 | AT+CGPSXD | Download XTRA assistant file |
| F1715 | AT+CGPSXDAUTO | Download XTRA assistant file automatically |
| F1716 | AT+CGPSPMD | Configure positioning mode |
| F1717 | AT+CGPSMSB | Configure based mode switch to standalone |
| F1718 | AT+CGPSHOR | Configure positioning desired accuracy |
| F1719 | AT+CGNSSINFO | Get GNSS fixed position information |
| F1720 | AT+CGNSSMODE | Configure GNSS support mode |
| 18. LBS | Command | Description |
| F1801 | AT+CLBS | Base station Location |
| F1802 | AT+CLBSCFG | Base station Location configure |
| 19. Hardware | Command | Description |
| F1901 | AT+IPREX | Set UART local baud rate permanently |
| F1902 | AT+CFGRI | Indicate RI when using URC |
| F1903 | AT+CSCLK | Control UART sleep |
| F1904 | AT+CMUX | Enable the multiplexer over the UART |
| F1905 | AT+CGFUNC | Enable/disable the function for the special GPIO |
| F1906 | AT+CGDRT | Set the direction of specified GPIO |
| F1907 | AT+CGSETV | Set the value of specified GPIO |
| F1908 | AT+CGGETV | Get the value of specified GPIO |
| F1909 | AT+CPCIEMODE | Get or set the mode of PCIE |
| 20. Hardware Related | Command | Description |
| F2001 | AT+CVALARM | Set overvoltage and undervoltage alarm |
| F2002 | AT+CADC | Read the value of ADC |
| F2003 | AT+CADC2 | Read the value of ADC2 |
| F2004 | AT+CMTE | Set the power action when over the critical temperature |
| F2005 | AT+CPMVT | Set the power action when overvoltage and undervoltage |
| F2006 | AT+CDELTA | Set module reboot to recovery mode |
| F2007 | AT+CBC | Read the voltage value of the power supply |
| F2008 | AT+CPMUTEMP | Read the temperature of the modules |
| F2009 | AT+CUSBCFG | Set usbid,adb mode,edl mode and bootloader mode |
| F2010 | AT+CCPUTEMP | Read the temperature of CPU different zones |
| F2011 | AT+CCUART | Open or close the main uart |
| 21. UIM Hot Swap | Command | Description |
| AT+UIMHOTSWAPON | Set UIM hot swap function on or off | |
| AT+UIMHOTSWAPLEVEL | Set UIM card detection level |
| 22. File System | Command | Description |
| F2201 | AT+FSCD | Select directory as current directory |
| F2202 | AT+FSMKDIR | Make new directory in current directory |
| F2203 | AT+FSRMDIR | Delete directory in current directory |
| F2204 | AT+FSLS | List directories/files in current directory |
| F2205 | AT+FSDEL | Delete file in current directory |
| F2206 | AT+FSRENAME | Rename file in current directory |
| F2207 | AT+FSATTRI | Request file attributes |
| F2208 | AT+FSMEM | Check the size of available memory |
| F2209 | AT+FSLOCA | Select storage place |
| F2210 | AT+FSCOPY | Copy an appointed file |
| F2211 | AT+CFTRANRX | Transfer a file to EFS |
| F2212 | AT+CFTRANTX | Transfer a file from EFS to host |
| 23. Audio | Command | Description |
| F2301 | AT+CREC | Record wav audio file |
| F2302 | AT+CRECAMR | Record amr audio file |
| F2303 | AT+CCMXPLAY | Play audio file |
| F2304 | AT+CCMXSTOP | Stop playing audio file |
| 24. TTS | Command | Description |
| F2401 | AT+CDTAM | TTS play path, local or remote |
| F2402 | AT+CTTS | TTS operation, play or stop |
| F2403 | AT+CTTSPARAM | TTS parameters, set or get |
| 25. Bluetooth | Command | Description |
| F2501 | AT+BTINIT | Init Bluetooth service |
| F2502 | AT+BTTERM | Stop Bluetooth service |
| F2503 | AT+BTPOWER | Open/Close Bluetooth |
| F2504 | AT+BTHOST | Get or Set host name |
| F2505 | AT+BTSCAN | Scan BT devices |
| F2506 | AT+BTPAIR | Pair with other BT device |
| F2507 | AT+BTPAIRED | Get Paired BT devices |
| F2508 | AT+BTUNPAIR | Unpair with the paired BT device |
| F2509 | AT+BTOPPREG | OPP Register |
| F2510 | AT+BTOPPSEND | OPP send file |
| F2511 | +BTOPPRECVING | OPP receive file notification |
| F2512 | AT+BTOPPACCEPT | OPP accept or refuse received file |
| F2513 | AT+BTGATTREG | GATT register |
| F2514 | AT+BTGATTCRESRV | GATT create service |
| F2515 | AT+BTGATTCRECHAR | GATT create service characteristic |
| F2516 | AT+BTGATTCRECHARDES | GATT create service characteristic description |
| F2517 | AT+BTGATTSTARTSRV | GATT start/stop service |
| F2518 | AT+BTGATTSTARTADV | GATT start advertisement |
| F2519 | AT+BTGATTDELSRV | GATT delete service |
| F2520 | +BTGATTCONN | GATT client connect status |
| F2521 | +BTGATTWRIND | GATT receive client write request |
| F2522 | AT+BTGATTWRCFM | GATT response to BTGATTWRIND |
| F2523 | +BTGATTREADIND | GATT receive client read request |
| F2524 | AT+BTGATTREADCFM | GATT response to BTGATTREADIND |
| F2525 | AT+BTGATTNOTIFY | GATT send notification to client |
| 26. MIFI | Command | Description |
| F2601 | AT+CWMAP | Open/Close MiFi |
| F2602 | AT+CWSSID | SSID setting |
| F2603 | AT+CWBCAST | Broadcast setting |
| F2604 | AT+CWAUTH | Authentication type, encrypt mode and password setting |
| F2605 | AT+CWMOCH | 80211 mode and channel setting |
| F2606 | AT+CWISO | Client isolation setting |
| F2607 | AT+CWDHCP | Get the current DHCP configuration |
| F2608 | AT+CWNAT | NAT type setting |
| F2609 | AT+CWCLICNT | Get client number connected to the MiFi |
| F2610 | AT+CWRSTD | Restore to default setting |
| F2611 | AT+CWMAPCFG | MiFi configuration setting |
| F2612 | AT+CWMACADDR | Get MAC address |
| F2613 | AT+CWNETCNCT | Query the connection to the network |
| F2614 | AT+CWSTASCAN | Scan WIFI network |
| F2615 | AT+CWSTACFG | STA mode configuration setting |
| F2616 | AT+CWSTAIP | Get STA mode IP address |
| 27. Gadgets on the AP Side | Command | Description |
| F2701 | AT+NETACT | Open/Close Data call link |
Radar Sensor SoC & Module
WiFi IoT Module
5G/LTE/CAT-M1/NB-IoT
WiSUN/HaLow/Thread Module
