Easylink 앱을 사용하여 통신모듈을 WiFi AP에 접속시키는 방법을 간략히 설명한다.
1. Open the APP
Click the “+” icon in the upper right corner of the interface to enter the main interface of the device distribution network.
2. Start distribution network:
Press the Easylink button on the device to enter the re-distribution state.
The APP side inputs the SSID and KEY of the WiFi, as shown in the figure below, click the fast distribution mode: “Fast mode”.
3. After the device obtains the SSID and KEY, the APP discovers the device, as shown in the figure below,
click Confirm to complete the distribution network.
4. Click the icon “ < ” in the above image to enter the device list interface → Click the icon “ i icon to enter the device information page.
5. In the device list, click “Edit” in the figure to enter the device information modification interface.
6. In the modification interface, the user can reset the device IP address, port number and other information,
as shown below, click “confirm” to save successfully.
After the device information is modified, the module debug serial port output log information is as follows:
7. Click the device name in the device list to enter the device serial port transparent dialogue interface, as shown below.
⊕ The serial port transparent transmission demonstration function of the mobile APP only supports iOS, and does not support Android at present.
At this point, you need to use the USB to serial port tool to connect the user serial port of the module to the PC,
and open the serial port tool software of the PC to send and receive operations, as shown in the figure below.
The transparent information is specifically as follows:
- Mobile APP sends to the device → Hello g55
- The device sends to the mobile APP → hello easylink
The above is the Easylink distribution process. Users can use the Easylink function to distribute the device to the MXOS smart device.
WiFi IoT Module
Bluetooth Module
5G/LTE/CAT-M1/NB-IoT
