CME ERROR Codes
Final result code +CME ERROR: <err> indicates an error related to mobile equipment or network.
The operation is similar to ERROR result code.
None of the following commands in the same Command line is executed.
Neither ERROR nor OK result code shall be returned.
<err> values used by common messaging commands:
| Code of <err> | Meaning |
| 0 | phone failure |
| 1 | no connection to phone |
| 2 | phone-adaptor link reserved |
| 3 | operation not allowed |
| 4 | operation not supported |
| 5 | PH-SIM PIN required |
| 6 | PH-FSIM PIN required |
| 7 | PH-FSIM PUK required |
| 10 | SIM not inserted |
| 11 | SIM PIN required |
| 12 | SIM PUK required |
| 13 | SIM failure |
| 14 | SIM busy |
| 15 | SIM wrong |
| 16 | incorrect password |
| 17 | SIM PIN2 required |
| 18 | SIM PUK2 required |
| 20 | memory full |
| 21 | invalid index |
| 22 | not found |
| 23 | memory failure |
| 24 | text string too long |
| 25 | invalid characters in text string |
| 26 | dial string too long |
| 27 | invalid characters in dial string |
| 30 | no network service |
| 31 | network timeout |
| 32 | network not allowed – emergency call only |
| 40 | network personalization PIN required |
| 41 | network personalization PUK required |
| 42 | network subset personalization PIN required |
| 43 | network subset personalization PUK required |
| 44 | service provider personalization PIN required |
| 45 | service provider personalization PUK required |
| 46 | corporate personalization PIN required |
| 47 | corporate personalization PUK required |
| 99 | resource limitation |
| 100 | unknown |
| 103 | Illegal MS |
| 106 | Illegal ME |
| 107 | GPRS services not allowed |
| 111 | PLMN not allowed |
| 112 | Location area not allowed |
| 113 | Roaming not allowed in this location area |
| 132 | service option not supported |
| 133 | requested service option not subscribed |
| 134 | service option temporarily out of order |
| 148 | unspecified GPRS error |
| 149 | PDP authentication failure |
| 150 | invalid mobile class |
| 160 | DNS resolve failed |
| 161 | Socket open failed |
| 171 | MMS task is busy now |
| 172 | The MMS data is oversize |
| 173 | The operation is overtime |
| 174 | There is no MMS receiver |
| 175 | The storage for address is full |
| 176 | Not find the address |
| 177 | The connection to network is failed |
| 178 | Failed to read push message |
| 179 | This is not a push message |
| 180 | gprs is not attached |
| 181 | tcpip stack is busy |
| 182 | The MMS storage is full |
| 183 | The box is empty |
| 184 | failed to save MMS |
| 185 | It is in edit mode |
| 186 | It is not in edit mode |
| 187 | No content in the buffer |
| 188 | Not find the file |
| 189 | Failed to receive MMS |
| 190 | Failed to read MMS |
| 191 | Not M-Notification.ind |
| 192 | The MMS enclosure is full |
| 193 | Unknown |
| 600 | No Error |
| 601 | Unrecognized Command |
| 602 | Return Value Error |
| 603 | Syntax Error |
| 604 | Unspecified Error |
| 605 | Data Transfer Already |
| 606 | Action Already |
| 607 | Not At Cmd |
| 608 | Multi Cmd too long |
| 609 | Abort Cops |
| 610 | No Call Disc |
| 611 | BT SAP Undefined |
| 612 | BT SAP Not Accessible |
| 613 | BT SAP Card Removed |
| 614 | AT Not Allowed By Customer |
| 753 | missing required cmd parameter |
| 754 | invalid SIM command |
| 755 | invalid File Id |
| 756 | missing required P1/2/3 parameter |
| 757 | invalid P1/2/3 parameter |
| 758 | missing required command data |
| 759 | invalid characters in command data |
| 765 | Invalid input value |
| 766 | Unsupported mode |
| 767 | Operation failed |
| 768 | Mux already running |
| 769 | Unable to get control |
| 770 | SIM network reject |
| 771 | Call setup in progress |
| 772 | SIM powered down |
| 773 | SIM file not present |
| 791 | Param count not enough |
| 792 | Param count beyond |
| 793 | Param value range beyond |
| 794 | Param type not match |
| 795 | Param format invalid |
| 796 | Get a null param |
| 797 | CFUN state is 0 or 4 |
WiFi IoT Module
Bluetooth Module
5G/LTE/CAT-M1/NB-IoT
