WiSUN Regulation in Korea
| Channel | Frequency [㎒] | Power Density/MHz | Remark | |
| 1 | 917.1 | 3mW 이하 | ||
| 2 | 917.3 | 10mW 이하 | ||
| 3 | 917.5 | 3mW 이하 | ||
| 4 | 917.7 | 3mW 이하 | ||
| 5 | 917.9 | 10mW 이하 | ||
| 6 | 918.1 | 3mW 이하 | ||
| 7 | 918.3 | 3mW 이하 | ||
| 8 | 918.5 | 10mW 이하 | ||
| 9 | 918.7 | 3mW 이하 | ||
| 10 | 918.9 | 3mW 이하 | ||
| 11 | 919.1 | 10mW 이하 | ||
| 12 | 919.3 | 3mW 이하 | ||
| 13 | 919.5 | 3mW 이하 | ||
| 14 | 919.7 | 10mW 이하 | ||
| 15 | 919.9 | 3mW 이하 | ||
| 16 | 920.1 | 3mW 이하 | ||
| 17 | 920.3 | 10mW 이하 | ||
| 18 | 920.5 | 3mW 이하 | ||
| 19 | 920.7 | 10mW 이하 | ||
| 20 | 920.9 | 10mW 이하 | ||
| 21 | 921.1 | 10mW 이하 | ||
| 22 | 921.3 | 10mW 이하 | ||
| 23 | 921.5 | 10mW 이하 | ||
| 24 | 921.7 | 10mW 이하 | ||
| 25 | 921.9 | 10mW 이하 | ||
| 26 | 922.1 | 25mW 이하 | ||
| 27 | 922.3 | 25mW 이하 | ||
| 28 | 922.5 | 25mW 이하 | ||
| 29 | 922.7 | 25mW 이하 | ||
| 30 | 922.9 | 25mW 이하 | ||
| 31 | 923.1 | 25mW 이하 | ||
| 32 | 923.3 | 25mW 이하 |
2. Device Preparation
Build the “wisun_soc_network_measurement” project and flash it on the selected EFR32
3. Networks Setup and Test
If there is a WiSUN network with the same network name set in the node, it attempts to connect on its own.
In order for a node to connect to the network without problems, the network name must be match. and a matching Wi-SUN PHY configuration is available nearby,
the Performance Measurement node connects to it using the best parent node available (selected by the RPL routing protocol).
-. how to networks name
– how to Wi-SUN PHY → refer to “UG495: Silicon Labs Wi-SUN Developer’s Guide“
| NO | Command | Response | 설명 |
| 1 | AT+CPIN? |
+CPIN: READY OK |
SIM Card의 상태를 확인 |
| 2 | AT+CSQ |
+CSQ: 25,99 OK |
통신환경(신호품질)을 체크 |
| 3 | AT+CGREG? |
+CGREG: 0,5 OK |
PS 통신망에 등록상태를 확인 |
| – | AT+COPS? |
+COPS: 0,0,”SKTelecom Singtel”,7 OK |
Operator 정보 확인 |
| – | AT+CPSI? |
+CPSI: LTE,Online,450-05, 0x1907, 260503,145,EUTRAN-BAND7,2850,5,5, -119,-970,-659,13 OK |
네트워크 정보 확인 |
| 4 | AT+CGDCONT? |
+CGDCONT: 1,”IP”,”m2minternet”, “0.0.0.0”,0,0,0,0
+CGDCONT: 2,”IPV4V6″,”ims”, “0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0 +CGDCONT: 3,”IPV4V6″,””, “0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,1 OK |
PDP Context 정보 확인 |
| – |
AT+CGDCONT=1,”IP” ,”m2minternet” |
OK |
PDP Context 설정 ⊕ m2minternet=통신사 APN 이름 |
| 5 | AT+CGACT? | +CGACT: 1,1 +CGACT: 2,0 +CGACT: 3,0OK |
PDP Context 활성화 상태 확인 |
| – | -AT+CGACT=1,1 | OK | PDP Context 활성화 |
| 6 | AT+CGPADDR | +CGPADDR: 1,10.17.84.249 +CGPADDR: 2,0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 +CGPADDR: 3,0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0OK |
Ensure the first PDP context get a IP address |
| – |
AT+CPING=”www.google.com”, 1,4,64,1000,10 000,255 |
+CPING: 1,142.251.12.103,64,148,255 +CPING: 1,142.251.12.103,64,159,255 +CPING: 1,142.251.12.103,64,170,255 +CPING: 1,142.251.12.103,64,165,255 +CPING: 3,4,4,0,148,170,159 |
IP 동작확인 |
WiFi IoT Module
Bluetooth Module
5G/LTE/CAT-M1/NB-IoT
