SIM7000 Series 개발자보드
SIM7000E 개발자보드(EVB KIT)는 Base Board+TE KIT(SIM7000 IF Board)+AC/DC Adaptor+Antenna+USB Cable 로 구성되어 있다.
SIM7000을 이동통신망에 접속하기 위해 SIM Card를 별도로 구매하여 사용해야 한다.
1. SIM7000E 개발자보드 구성
 |
 |
| SIM7000 EVB 개발환경(결합상태) | SIM7000 EVB 개발환경(분해상태) |
2. SIM7000E 개발자보드 인터페이스
|
|
A: USB Interface |
Enhanced COM= AT Command Port Standard COM = Debug Port |
| B: Power Key |
Press for more than 1.5 sec, then the module will be turned on and network LED light(D401) will blink |
|
| C: Reset | Reset the module | |
| D: Power SW(S201) |
After 5V Adapter inserted, Switch on, then power LED(D201) will be solid on. |
|
| E: RF SW(S401) | ON=Flight-mode off, OFF= Flight-mode on | |
| F: TE Connector | TEKIT Connector | |
| G: TE Connector | TEKIT Connector | |
| H: SIM Holder(J202) | Main SIM Card holder | |
| I: LED for Net-light | Blinking according to various net status | |
| J: LED for Power |
Bright: EVB Power ON, Extinct: EVB Power OFF |
|
| K: Test Point | ||
| L: Studs and Nuts | ||
| M: Direction Mark | TE Board direction mark | |
| N: LED for Status | Bright: Module runs normally Extinct: System is powered down |
|
| O: Handset Jack | (1)MIC-, (2)SPK-, (3)SPK+, (4)MIC+ | |
| P: Power Jack | 5V/2.0A DC source input | |
| Q: SIM Holder(J203) | To supports dual SIM module | |
| R: Ear-phone Jack |
4. Evaluation Board Schematics
 |
§ SIM7000-TE Kit_Schematic_8FCA00-_V1.01 | TE Board Schematic |
|
§ SIMCOM_EVB KIT_Schematic_8PYA00-SIMCOM-EVB_V1.02 | Base Board Schematic |
WiFi IoT Module
Bluetooth Module
5G/LTE/CAT-M1/NB-IoT
