SIM7070/SIM7080 Series Evaluation Board
SIMCOM 모듈은 개발자들이 LPWA를 이용한 IoT 시험을 손쉽게 해 볼 수 있도록 개발자보드를 제공하고 있다.
1. SIM7070/7080 개발자보드 구성
TE Kit( EVB+TE) | Board | Description |
TE Board | Daughter Board including Cellular Module | |
EVB | Main Board for SIM7000/7070/7080 |
2. SIM7070/7080 TE Board
SIM7070 TE Board | Part | Description |
|
A | Module |
C | Micro USB Connector | |
D | GNSS Antenna Connector | |
E | Main Antenna Connector | |
F | TE Module Orientation Mark | |
G | Connector to EVB | |
H | Connector to EVB | |
P | Unused |
3. Main Board
Main Board는 SIM7000, SIM7070, SIM7080이 공용으로 사용하고 있다.
|
A: USB Interface |
Enhanced COM= AT Command Port Standard COM = Debug Port |
B: Power Key |
Press for more than 1.5 sec, then the module will be turned on and network LED light(D401) will blink |
|
C: Reset | Reset the module | |
D: Power SW(S201) |
After 5V Adapter inserted, Switch on, then power LED(D201) will be solid on. |
|
E: RF SW(S401) | ON=Flight-mode off, OFF= Flight-mode on | |
F: TE Connector | TEKIT Connector | |
G: TE Connector | TEKIT Connector | |
H: SIM Holder(J202) | Main SIM Card holder | |
I: LED for Net-light | Blinking according to various net status | |
J: LED for Power |
Bright: EVB Power ON, Extinct: EVB Power OFF |
|
K: Test Point | ||
L: Studs and Nuts | ||
M: Direction Mark | TE Board direction mark | |
N: LED for Status | Bright: Module runs normally Extinct: System is powered down |
|
O: Handset Jack | (1)MIC-, (2)SPK-, (3)SPK+, (4)MIC+ | |
P: Power Jack | 5V/2.0A DC source input | |
Q: SIM Holder(J203) | To supports dual SIM module | |
R: Ear-phone Jack |
3. Accessories
Image | Accesorries | Description |
M | GNSS Antenna | |
N | Main Antenna | |
AC/DC Adaptor |
4. Documents and Download
§ 8VC000-SIM7070G-TE_V1.02_DL(210617) | SIM7070 TE Schematic | |
§ 8VC000-SIM7080G-TE_V1.02_DL(190429) | SIM7080 TE Schematic | |
§ 8PYA00-SIMCOM-EVB_V1.02_DL(160727) | EVB Schematic |