OTA with FeasyBlue

Modules that support OTA with FeasyBlue app are as listed in the table below.

 

Supported Modules	OTA Protocol	FW
FSC-BT906	SPP
FSC-BT909	SPP
FSC-BT926	SPP
FSC-BT955	SPP	DFU Name → BT955/audtxrx/latest
FSC-BT958	SPP
FSC-BT986	SPP

 

Note. DFU Name is used to get FW with App, Refer to below OTA sequence

 

 

 

 

1.  OTA App Installation

 

♦ Install FeasyBlue from the Android app store such as Google Play.

⊕ Sometimes you need to set up the cell phone to permit the FeasyBlue app to use the Location information in settings.

 

 

 

 

♦ Prepare FW to update.

Store the FW to be updated in a mobile phone or a location accessible by mobile phone

 

 

 

 

2. OTA Procedure

 

Step1:

Power on the module → Enter SPP mode → Enter paring mode

⊕ Most of Feasycom’s Bluetooth module is set to SPP and paring mode by default, If not enable

 

 

Step2:

⊕ If can’t find the target device in the 3rd below, check whether it is already connected to your mobile phone or another phone.

 

Open FeasyBlue	Select “OTA upgrade”	Select the target device

 

 

Step3.

If you have FW, select “Select firmware”	Selected “Select firmware”	Select the folder with FW

 

 

 

Step4.

Start Updating	Wait until OTA finished	OTA is finished