Preparing Commissioning 

In order to do commissioning, you must deliver the Commissionee’s Onboarding Code to the Commissioner.

There are 3 types of Onboarding codes, and here explain how to check these 3 codes with EDT2400X-SA.

1. Connect the USB port of EVB-EDT2400X-SA  to the PC

Check the COM port in the “device manager” on your PC

.

2. Open Serial Console and Set the Parmeters of COM Port

Set the COM port number and parameters for COM port → Data 8 bit, No Parity, Baud Rate 115200 bps

3. Command “help” in Serial Console

You can find onboardingcodes in the reponse of the  “help”

4. Query Onboarding Codes

Command → onboardingcodes onnetwork 

Response → 3 kinds of onboarding codes for commissioning, Refer to the table below