CMS ERROR Codes
Final result code +CMS ERROR: <err> indicates an error related to message service or network.
The operation is similar to ERROR result code.
None of the following commands in the same Command line is executed.
Neither ERROR nor OK result code shall be returned.
<err> values used by common messaging commands:
| Code of <err> | Meaning |
| 1 | Unassigned(unallocated) number |
| 3 | No route to destination |
| 6 | Channel unacceptable |
| 8 | Operator determined barring |
| 10 | Call barred |
| 11 | Reserved |
| 16 | Normal call clearing |
| 17 | User busy |
| 18 | No user responding |
| 19 | User alerting, no answer |
| 21 | Short message transfer rejected |
| 22 | Number changed |
| 25 | Pre-emption |
| 26 | Non-selected user clearing |
| 27 | Destination out of service |
| 28 | Invalid number format (incomplete number) |
| 29 | Facility rejected |
| 30 | Response to STATUS ENQUIRY |
| 32 | Normal, unspecified |
| 34 | No circuit/channel available |
| 38 | Network out of order |
| 41 | Temporary failure |
| 42 | Switching equipment Congestion |
| 43 | Access information discarded |
| 44 | Requested circuit/channel not available |
| 47 | Resources unavailable, unspecified |
| 49 | Quality of service unavailable |
| 50 | Requested facility not subscribed |
| 55 | Requested facility not subscribed |
| 57 | Bearer capability not authorized |
| 58 | Bearer capability not presently available |
| 63 | Service or option not available, unspecified |
| 65 | Bearer service not implemented |
| 68 | ACM equal or greater than ACM maximum |
| 69 | Requested facility not implemented |
| 70 | Only restricted digital information bearer capability is available |
| 79 | Service or option not implemented, unspecified |
| 81 | Invalid transaction identifier value |
| 87 | User not member of CUG |
| 88 | Incompatible destination |
| 91 | Invalid transit network selection |
| 95 | Semantically incorrect message |
| 96 | Invalid mandatory information |
| 97 | Message type non-existent or not implemented |
| 98 | Message type not compatible with protocol state |
| 99 | Information element non-existent or not implemented |
| 100 | Conditional information element error |
| 101 | Message not compatible with protocol |
| 102 | Recovery on timer expiry |
| 111 | Protocol error, unspecified |
| 127 | Interworking, unspecified |
| 128 | Telematic interworking not supported |
| 129 | Short message Type 0 not supported |
| 130 | Cannot replace short message |
| 143 | Unspecified TP-PID error |
| 144 | Data coding scheme (alphabet) not supported |
| 145 | Message class not supported |
| 159 | Unspecified TP-DCS error |
| 160 | Command cannot be acted |
| 161 | Command unsupported |
| 175 | Unspecified TP-Command error |
| 176 | TPDU not supported |
| 192 | SC busy |
| 193 | No SC subscription |
| 194 | SC system failure |
| 195 | Invalid SME address |
| 196 | Destination SME barred |
| 197 | SM Rejected-Duplicate SM |
| 198 | TP-VPF not supported |
| 199 | TP-VP not supported |
| 208 | SIM SMS storage full |
| 209 | No SMS storage capability in SIM |
| 210 | Error in MS |
| 211 | Memory Capacity Exceeded |
| 212 | SIM Application Toolkit Busy |
| 213 | SIM data download error |
| 224 | CP retry exceed |
| 225 | RP trim timeout |
| 226 | SMS connection broken |
| 255 | Unspecified error cause |
| 300 | ME failure |
| 301 | SMS reserved |
| 302 | operation not allowed |
| 303 | operation not supported |
| 304 | invalid PDU mode |
| 305 | invalid text mode |
| 310 | SIM not inserted |
| 311 | SIM pin necessary |
| 312 | PH SIM pin necessary |
| 313 | SIM failure |
| 314 | SIM busy |
| 315 | SIM wrong |
| 316 | SIM PUK required |
| 317 | SIM PIN2 required |
| 318 | SIM PUK2 required |
| 320 | memory failure |
| 321 | invalid memory index |
| 322 | memory full |
| 323 | invalid input parameter |
| 324 | invalid input format |
| 325 | invalid input value |
| 330 | SMSC address unknown |
| 331 | no network |
| 332 | network timeout |
| 340 | no cnma ack |
| 500 | Unknown |
| 512 | SMS no error |
| 513 | Message length exceeds maximum length |
| 514 | Invalid request parameters |
| 515 | ME storage failure |
| 516 | Invalid bearer service |
| 517 | Invalid service mode |
| 518 | Invalid storage type |
| 519 | Invalid message format |
| 520 | Too many MO concatenated messages |
| 521 | SMSAL not ready |
| 522 | SMSAL no more service |
| 523 | Not support TP-Status-Report & TP-Command in storage |
| 524 | Reserved MTI |
| 525 | No free entity in RL layer |
| 526 | The port number is already registerred |
| 527 | There is no free entity for port number |
| 528 | More Message to Send state error |
| 529 | MO SMS is not allow |
| 530 | GPRS is suspended |
| 531 | ME storage full |
| 532 | Doing SIM refresh |
WiFi IoT Module
Bluetooth Module
5G/LTE/CAT-M1/NB-IoT
