AT Commands for IP Application
| No | Command | Description |
| C0701 | AT+SAPBR | Bearer settings for applications based on IP |
C0701 AT+SAPBR Bearer Settings For Applications Based On IP
| T) AT+SAPBR=? |
+SAPBR: (0-4),(1-3), “ConParamTag”,”ConParamValue”
OK |
|
Parameters See Write Command |
|
| W) AT+SAPBR=<cmd_typ e>,<cid>[,ConParamT ag>,<ConParamValue>] |
OK
If <cmd_type>=2 +SAPBR: <cid>,<Status>,<IP_Addr> OK If <cmd_type>=4 +SAPBR: <ConParamTag>,<ConParamValue> OK
Unsolicited Result Code +SAPBR <cid>: DEACT |
|
Parameters <cmd_type> 0 Close bearer 1 Open bearer 2 Query bearer 3 Set bearer parameters 4 Get bearer parameters <cid> Bearer profile identifier <Status> 0 Bearer is connecting 1 Bearer is connected 2 Bearer is closing 3 Bearer is closed <ConParamTag> Bearer parameter “APN” Access point name string: maximum 64 characters “USER” User name string: maximum 32 characters “PWD” Password string: maximum 32 characters <ConParamValue> Bearer paramer value <IP_Addr> The IP address of bearer |
|
| Parameter Saving Mode | NO_SAVE |
| Max Response Time |
When <cmd_type> is 1, 85 seconds When <cmd_type> is 0, 65 seconds |
| Reference |
Note This command is applied to activate some applications such as HTTP, FTP. |
WiFi IoT Module
Bluetooth Module
5G/LTE/CAT-M1/NB-IoT
