EVB-EDT2400X-SA is a developer board installed with the EDT2400R-SA or EDT2400L-SA.
It will help you evaluate EDT2400X-SA or learn Matter IoT at an early stage.
1. EVB and Tool Image
Use JLINK-V9 as a flash tool.
|Evaluation with tool
2. EVB Interface
|Tact Switch for Module Reset
Tact Switch for General Purpose
Tact Switch for Commissioning or Pairing Mode
(BT0=ON for 7sec → Entering in to commissioning)
|Tact Switch for General Purpose
|Green LED for General Purpose
|Red LED for System & Net State Indication
Baud Rate=115,200 bps
Enhanced COM for Host MCU interface
Standard COM for CLI & Log Message
|FW Download with JLINK V9
Mini Simplicity Connector
(Connectable with Silicon Labs’ Wireless Pro Kit)
3. EVB Schematics
|Evaluation Board Schematic, REV0.9